API Nitra-Zorb
API Nitra-Zorb
API NITRA-ZORB filtration media is a ready-to-use pouch that can be added to your filter to remove ammonia, nitrite, and nitrate. NITRA-ZORB filtration media is made of natural and synthetic ion-exchange resins that selectively remove toxins from freshwater aquariums. NITRA-ZORB filtration media is completely phosphate-free and can be reused after recharging.
Size
1 pack, size 6
Instructions:
Rinse pouch under tap water. Place pouch in path of water flow in the aquarium filter. For a new aquarium or when ammonia or nitrite is detected: recharge every 5 days for the first month, and then every 2 weeks for the second month. For an established aquarium: recharge every 2 weeks. When nitrate is detected: recharge every 5 days until nitrate is reduced to 20ppm (mg/L) or less. Replace pouch after 2 months.
To recharge, dissolve 4 tablespoons (80 g) of API AQUARIUM SALT in 8 oz. (240 ml) of warm tap water. Soak pouch for 2 hours, then rinse lightly in tap water. When not in use, store pouch in recharging solution.
FAQ
What are the dimensions of API NITRA-ZORB filtration media bags?
The actual pouch is 7 x 7 inches square, but because of the media, the final dimensions are 7 x 6.5 inches. The pouch is sized to sit nicely in one of the baskets of canister filters. All of the size 6 pouches (PHOS-ZORB filtration media, NITRA-ZORB filtration media, BIO-CHEM ZORB filtration media, ACTIVATED CARBON, etc.) will be this size. This pouch does not have any stiffness to it, and may easily be placed in the back of a hang-on-back filter, or other sizes of a canister filter. If the filter is very small, the pouch can be cut open and partial contents can be put into a small filter sock.
Does API NITRA-ZORB filtration media replace other media?
API NITRA-ZORB filtration media should not fully replace other media; it is for temporary use only.